制导炸弹滚转通道混合灵敏度鲁棒控制器设计

制导炸弹在大空域飞行过程中受到外界干扰和未建模摄动都较大,为了适应较大摄动,采用混合灵敏度方法来设计鲁棒控制器.首先推导了包含S/T/R的广义受控对象的状态空间模型,将混合灵敏度问题化为标准H∞问题.然后针对混合灵敏度问题中如何选取权函数的关键性问题,讨论了权函数选取的一般原则,提出了权函数选取的一般方法,并尝试给出权函数的一般形式.最后采用该方法对制导炸弹滚转通道进行了控制器设计,仿真结果表明:H∞控制器有较好的鲁棒性能,且比传统PID控制有更好的时域性能.     

一种变质心高速旋转炮弹鲁棒姿态控制律

针对采用变质心技术的高速旋转炮弹的姿态控制问题,提出一种基于扩张状态观测器的动态面控制方法。根据由弹体和单滑块组成的多体系统的特点,建立了系统的姿态动力学模型,并对其进行了合理的简化。将系统的滚转通道引起的强耦合、建模误差及外部扰动等视为未知不确定干扰,并且考虑由于炮弹尺寸限制而引起的多体系统控制输入(滑块位移)的有限性,设计了扩张状态观测器和辅助系统,分别对系统的干扰进行观测以及处理控制输入的有限性,综合动态面控制技术设计了姿态控制律,最后基于李雅普诺夫稳定性原理证明了控制器的稳定性。仿真结果表明,该控制器能够在克服干扰的前提下快速稳定地跟踪指令信号,具有良好的控制精度和鲁棒性。     

高原环境对弹丸动态稳定性的影响

分析了高原环境低空气密度对弹丸动态稳定性的影响。给出了弹道坐标系中的力方程组和非滚转弹体坐标系中的力矩方程组,并通过线性化方法得到弹丸角运动的状态空间模型。列出了角运动状态矩阵的四个特征根,并利用复数平方根计算方法得到特征根实部的表达式。提出弹丸动态稳定性稳定因子的新定义,并证明新的动态稳定条件与传统的动态稳定条件是一致的。讨论了低空气密度对尾翼稳定弹和旋转稳定弹动态稳定性的影响,并通过仿真说明弹丸在高原条件和平原条件下的动态稳定性存在差异。     

Effects of material of metallic frame on the penetration resistances of ceramic-metal hybrid structures

The effects of metallic material on the penetration resistances of ceramic-metal hybrid structures against vertical long-rod tungsten projectiles were studied by artillery-launched experiments and numerical simulation. Hybrid structures with rectangular cores in transverse orthogonal arrangement and slide-fitting ceramic inserts of zirconia toughened alumina prisms were fabricated with titanium alloy TC4 (Ti6Al4V), AISI 4340 steel and 7075 aluminum alloy panels, respectively. The results showed that the hybrid structure of Ti6Al4V exhibited the highest penetration resistance, followed by that of 7075 aluminum alloy with the same area density. The penetration resistance of the hybrid structure of AISI 4340 steel was the lowest. The underlying mechanisms showed that the metallic material of a ceramic-metal hybrid structure can directly affect its energy absorption from the impact projectile, which further affects its penetration resistance. Different metallic frames exhibited different failure characteristics, resulting in different constraint conditions or support conditions for ceramic prisms. The high penetration resistance of the Ti6Al4V hybrid structure was due to its stronger back support to ceramic prisms as compared with that of AISI 4340 steel hybrid structure, and better constraint condition for ceramic prisms by metallic webs as compared with that of 7075 aluminum alloy hybrid structure. The results of mass efficiency and thickness efficiency showed that the Ti6Al4V hybrid structure has advantages in reducing both the thickness and the mass of protective structure. In addition, because the ceramic-metal hybrid structures in the present work were heterogeneous, impact position has slight influence on their penetration resistances.     

决定电视侦察弹射击诸元弹道模型的建立与仿真

在分析电视侦察弹各阶段弹道特点的基础上,建立了求取弹道诸元和射击诸元的弹道数学模型,给出了简单、精确、快速逼近目标的方法,并利用该模型进行了弹道逼近和决定射击诸元的模拟计算.结果表明在初始射角赋予非常简单的条件下,只用两条弹道,再通过一次插值,即可逼近开舱点,获得射击开始(装定)诸元.此模型和方法可用于射表编制和指挥自动化系统.     

舰炮一维弹道修正弹对岸校射方法研究

一维弹道修正弹是近年来兵器领域新研制的一种低成本信息化弹药，目前对其校射方法尚未有成熟的标准。为此，在分析一维弹道修正弹对岸射击工作原理、计算有无控弹试射的基础上，提出舰炮武器系统使用有控一维弹道修正弹的校射新方法，并确定了校射的组数和发数。分别对使用新方法前后的射击效能进行了数值仿真，结果表明本方法能极大地提高舰炮武器系统的射击效能。所提方法对舰炮武器作战效能的提高具有较强的理论价值和一定的参考意义。     

长杆弹垂直侵彻横向运动板的数值分析

对钨合金长杆弹垂直侵彻横向运动钢板的偏转角变化规律进行了理论及仿真研究。采用刚体力学理论推导了刚体长杆弹侵彻横向运动钢板的偏转角公式。利用ANSYS/LS-DYNA有限元软件对RIGID及STEINBERG两种材料模型长杆弹垂直侵彻横向运动JOHNSON-COOK模型钢板进行了仿真,根据长杆弹头部和尾部横向相对运动规律,得到了长杆弹的偏转规律。仿真结果表明:板的横向运动速度越大,长杆弹偏转角越大,且偏转角在整个侵彻过程中一直保持增大的趋势。     

红外制导防空导弹落入概率评定研究

红外制导防空导弹飞行试验受用弹量的限制,仅能考核制导精度指标,对导弹落入概率、杀伤区边界条件以及引战配合效率等重要战术技术指标难以进行合理考核。给出了导弹制导精度、脱靶量和落入概率的内在含义,针对红外制导防空导弹攻击高低速目标的制导精度指标,采用弹道仿真与飞行试验相结合的方法,研究了导弹落入概率和制导精度的评定方法,用弹道仿真数据评估导弹落入以目标质心为中心的不同区域的概率。     

Moving horizon based wavelet de-noising method of dual-observed geomagnetic signal for nonlinear high spin projectile roll positioning

Phase-frequency characteristics of approximate sinusoidal geomagnetic signals can be used for projectile roll positioning and other high-precision trajectory correction applications. The sinusoidal geomagnetic signal deforms in the exposed and magnetically contaminated environment. In order to preciously recognize the roll information and effectively separate the noise component from the original geomagnetic sequence, based on the error source analysis, we propose a moving horizon based wavelet de-noising method for the dual-observed geomagnetic signal filtering where the captured rough roll frequency value provides reasonable wavelet decomposition and reconstruction level selection basis for sampled sequence; a moving horizon window guarantees real-time performance and non-cumulative calculation amount. The complete geomagnetic data in full ballistic range and three intercepted paragraphs are used for performance assessment. The positioning performance of the moving horizon wavelet de-noising method is compared with the band-pass filter. The results show that both noise reduction techniques improve the positioning accuracy while the wavelet de-noising method is always better than the band-pass filter. These results suggest that the proposed moving horizon based wavelet de-noising method of the dual-observed geomagnetic signal is more applicable for various launch conditions with better positioning performance.